Digital switching configuration file
Please use the form below to generate a configuration file for your MFD with CZone support. Be sure that the Yacht Device products in your network have the latest firmware.
The DIP Switch setting on the MFD must be different from DIP Switches of YD products (they are generated by the serial number for all products except Yacht Devices Autopilot). For example, you can use 00000001 to configure your MFD.
Available viewers (click on the link below to view the screenshot):
- Raymarine. When using Raymarine MFD (LightHouse 3.8 is required), you don't need to configure the DIP Switch manually and you can just import the custom page from the generated ZIP file (do not unpack it!) on the Settings page of "Dashboard" section and reboot the MFD. The downloaded file will contain pages for the "Dashboard" section and for the combined "Chart/Dashboard" section. See this article for details.
- Furuno. To configure Furuno MFD, you need to upload the configuration file over the NMEA 2000 network with the CAN Log Viewer, either our USB or one of our NMEA 2000 Wi-Fi gateways or routers is required.
- For other MFDs (Garmin, B&G, Simrad, Lowrance) you can upload a configuration file from a Micro SD card, refer to this article.
