Configuration file for MFD

Please use the form below to generate a configuration file for your MFD. If you have two YDCC units, the second unit must be manually configured for the secondary group (from connected buttons or with YD:GROUP SECONDARY command, see the Section VII of the User Manual for details).

The DIP Switch setting on the MFD must be different from the YDCC DIP Switch setting (it is generated by the serial number). For example, you can use 00000001 to configure your MFD.

When using Raymarine MFD (LightHouse 3.8 is required), you don't need to configure the DIP Switch manually and you can just import the custom page from generated ZIP file (do not unpack it!) on the Settings page of "Dashboard" section and reboot the MFD. The downloaded file will contain pages for the "Dashboard" section and for the combined "Chart/Dashboard" section. See this article for details.

For other MFDs (Garmin, B&G, Furuno, Simrad, Lowrance), refer to this article.

If the check box below is unchecked, you will need to activate CZone support in the Circuit Control manually (please, refer sections VII and X of the Manual).

(read only)

Add one more YDCC unit (YD:GROUP SECONDARY)

Automatically activate CZone support on YDCC units

Return to Circuit Control page.